100PSI 300lph 240v Mains Booster Pump and Control Module

Reverse Osmosis production is at its most efficent when pressurised, as this will lower your TDS readings on RO output (in some cases by anything upto 50%!).

Our unique patented booster pump technology enables your van mount or static system to fill up effieciently and quickly!

Why worry about the pressure input to your RO membranes? More pressure equals lower TDS readings which means your final stage, your resin lasts longer!

Designed for use with the Liquid Logic versions of controllers but can be fitted to other 12v control systems as well. The module & booster pump can be controlled by means of the Liquid Logic RO V2 and V3 Controllers enabling full control of the booster pump when in 'FILL' mode. This includes auto shut off once the tank is full and the Liquid Logic float has been activated.

These booster pumps work off the mains only and give a very long lifespan, can run continuously, use a high powered motor rated at 245w for a greater flow at higher pressure.

Comes with 25 metres of hookup cable and all pre setup ready to plug in and use!

300lph @ 100psi = 10 lpm depending on filters/membranes.

245w continuous motor.

Length: 370mm long.