100PSI 600lph 240v Mains Booster Pump and Control Module

In stock

SKU

GM-BP-600-230V

£779.57 £649.64

230vac - delivers 600 lpm @ 100psi giving a filtered production of approximately 300 litres per hour based on a 50/50 waste ratio.

Comes ready to use with 5 metres of lead and option of either a UK Standard Plug or UK RCD Plug. Assembled to a stainless steel plate which gives the benefit of the hard wearing capabilities of stainless steel in a outdoor environment

Recommended to be used alongside our Liquid Logic S2 Static controller.

We recommend this pump when producing water using our 4021 membranes

This item is built to order, so will have a lead time upon order. Please call us if you require the item urgently.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Reverse Osmosis production is at its most efficent when pressurised, as this will lower your TDS readings on RO output (in some cases by anything upto 50%!).

Our unique patented booster pump technology enables your static system to fill up effieciently and quickly!

Why worry about the pressure input to your RO membranes? More pressure equals lower TDS readings which means your final stage, your resin lasts longer!

Designed for use with the Liquid Logic versions of controllers but can be fitted to other 12v control systems as well. The module & booster pump can be controlled by means of the Liquid Logic RO V2 and V3 Controllers enabling full control of the booster pump when in 'FILL' mode. This includes auto shut off once the tank is full and the Liquid Logic float has been activated.
These booster pumps work off the mains only and give a very long lifespan, can run continuously, use a high powered motor rated at 245w for a greater flow at higher pressure.

Comes with 5 metres of cable and a 13 amp RCD plug ready to plug in and use!

600lph @ 100psi = 10 lpm depending on filters/membranes.

245w continuous motor.

Length: 370mm long.