230v 1000LPH RO Production Booster Pump
230vdc - delivers 1000 lpm @ 100psi giving a filtered production of approximately 450 litres per hour based on a 50/50 waste ratio. Comes ready to use with 5 metres of lead and RCD standard 13amp household . Recommended to be used alongside our Liquid Logic S2 Static controller.
NB:- This booster pump CAN just be plugged into the mains - but it then has NO intelligence for shut off, and would continue to run water until unplugged. We STRONGLY recommend it be used WITH a controller so then the booster pump will shut off automatically once the tank is full.
Reverse Osmosis production is at its most efficient when pressurised, as this will lower your TDS readings on RO output (in some cases by anything upto 50%!).
Our unique patented booster pump technology enables your static system to fill up efficiently and quickly!
Why worry about the pressure input to your RO membranes? More pressure equals lower TDS readings which means your final stage, your resin lasts longer!
Designed for use with the Liquid Logic versions of controllers, the pump can be controlled by means of the Liquid Logic S2 Static Controller enabling full control of the booster pump when in 'FILL' mode. This includes auto shut off once the tank is full and the Liquid Logic float has been activated.
These booster pumps work off the mains only and give a very long lifespan, can run continuously, use a high powered motor rated at 375w for a greater flow at higher pressure.
Comes with 5 metres of cable and a 13 amp RCD plug ready to plug in and use!
1000 L/h @ 100psi = 15 L/m depending on filters/membranes.
550w continuous motor.
L 290mm x W 170mm x D 145mm