230v 600LPH RO Production Booster Pump
230vdc / 550 watt - delivers 600 lpm @ 100psi giving a filtered production of approximately upto 300 litres per hour based on a 50/50 waste ratio.
Comes ready to use with either a UK Standard Plug or UK RCD Plug.
Recommended to be used alongside our Liquid Logic S2 Static controller.
We recommend this pump when producing water using our 4021 membranes
NB:- This booster pump CAN just be plugged into the mains - but it then has NO intelligence for shut off, and would continue to run water until unplugged. We STRONGLY recommend it be used WITH a controller so then the booster pump will shut off automatically once the tank is full.
Reverse Osmosis production is at its most efficent when pressurised, as this will lower your TDS readings on RO output (in some cases by anything upto 50%!).
Our unique patented booster pump technology enables your static system to fill up effieciently and quickly!
Why worry about the pressure input to your RO membranes? More pressure equals lower TDS readings which means your final stage, your resin lasts longer!
Designed for use with the Liquid Logic versions of controllers, the pump can be controlled by means of the Liquid Logic S2 Static Controller enabling full control of the booster pump when in 'FILL' mode. This includes auto shut off once the tank is full and the Liquid Logic float has been activated.
These booster pumps work off the mains only and give a very long lifespan, can run continuously, use a high powered motor rated at 245w for a greater flow at higher pressure.
Comes with 5 metres of cable and a 13 amp RCD plug ready to plug in and use!
600lph @ 100psi = 7lpm depending on filters/membranes.
540w continuous, with 2000-2100w watt motor.
L 250mm x W 120mm x D 175mm
