GrippaPRO HP 4040" Membranes
- New to the GrippaTank range - our GrippaPRO RO membrane is NOT a chinese made unit, but is made in the USA at the worlds leading membrane manufacturer.
- Up to 347 litres per hour of on-demand purified water (subject to flow, pressure, and temperature setup on system)
- Industry competitive salt rejection rates of 98.5%
- Robust construction with fibreglass outer wrap
Maximum Operating Temperature (ºC)
45 Maximum Operating Temperature (ºC) (over pH 10) 35
Maximum Operating Pressure (bar) 40
Minimum Operating Pressure (bar) 6.0
Applied Pressure (bar) 6.9
Maximum Feed Flow Rate (lpm) 60
Minimum Feed Flow Rate (lpm) 15
Maximum Recommended Recovery (%) 25
pH Range, Continuous Operation 3-10 pH Range, Short Term Cleaning 2-12 (30mins)
Maximum Feed Silt Density Index (SDI) 5.5
Chlorine Tolerance (mg/l) <0.1 mg/L
Maximum Feed Water Turbidity (NTU) <1
Comes with 1 years manufacturers fault warranty, which is only covered if the membrane has been used in conjunction with the above recommended parameters.
Write Your Own Review