S1150 GrippaPRO Static Purification System - Upto 1150 Litres Per Hour

Minimum flow and pressure: 2300lph / recommended pressure of 80psi but can run as low as 30psi.

What's included?

10.5 Ltr DI Vessel with Resin
2 x 4021" Carbon/Sediment Filter (changeable every 6 months or 360000 litres).
3 x 4040" US Technology RO Membranes capable of making upto 1182 litres of pure water an hour
All plumbing and fittings required (plug into the water mains and start making water!)
Patented GrippaTank Cabinet - designed to keep the system protected from being damaged, whilst being easy to maintain
Intelligent System Controller which includes features such as:

Auto Shut off and Auto Refill

- TDS Monitoring & Service Alerts
- Flow Meter - Overall, Service Cycle, & LPM
- Autoflush - On the hour every hour through the fillup
- Booster Pump Control
- Low Pressure Cutoff and Alert
Mains Booster Pump.
30 Metres of Hose & Connections for Waste & Inlet Water.
Assembled and Tested

What's not included?

Installation - although this is available via the checkout options.
Wall Fixings.

*Based on test figures with working pressure of 80psi, temperature of 25c, and a minimum flow rate.

Comparison figures System	Mains – no booster	Boosted System
300	3-5 hrs	1-2 hrs
400	4-6 hrs	2-4 hrs
500	6-8hrs	3-5hrs
650	7-9hrs	4-6hrs
850	8-10hrs	5-7hrs
1000	9-11hrs	6-7hrs

Above is a minimum guide only, based on worst case scenario – factors such as insufficient mains incoming flow, outside temperature, membrane age, and service interval will affect the above suggested guide figures.