Liquid Logic™ Hot Water Delivery Pump Flow Controller

Standard Version (NO TDS Monitoring) comes with:

·Liquid Logic™ Digital Controller
·Frost Stat and Hot water controller. Sends signal to the hot water system to switch on when controller is switched on and HTR ON mode is activiated. When the controller is switched off and the FROST STAT mode is on, the controller will activate the hot water system when temperatures are below 2c.
·New Memory Function - Allows two settings to be stored and then switched between (e.g. 1 or 2 users)
·All New Liquid Logic™ brings a new level of quality and robustness to controllers
·Protects itself with new Logic-Safe software against over-current situations, such as pump failure and power spikes
·Cuts resin use to a minimum by giving the operator fine control over flow rates
·Extends the life of resin cartridges
·Controls the water flow rate to pump-fed pole systems accurately and dependably
·Detects shut off situations and shuts pump down automatically
·Detects pressure switch activation and performs pump shutdown to prevent pressure switch wear, then informs the user
·Uses Logic-Sense Pushbutton to adjust for different system types. No need to set dials or switches inside the unit
·Sealed to IP63 to prevent water ingress, all electronics are protected from shock and moisture
·Detects low battery voltage and battery voltage indicator - alerts at 11v and shuts off at 10.5v to protect battery - can be disabled.
Comes complete with full wiring loom, connectors, fuse and illustrated instruction manual.