Liquid Logic™ V16 Delivery Pump Flow Controller

Standard V16 Version (NO TDS Monitoring) comes with:

-Controls the water flow rate to pump-fed pole systems accurately and dependably
·Detects shut off situations and shuts pump down automatically
·Detects pressure switch activation and performs pump shutdown to prevent pressure switch wear, then informs the user
·Sealed to IP63 to prevent water ingress, all electronics are protected from shock and moisture
·Detects low battery voltage and battery voltage indicator - alerts at 11v and shuts off at 10.5v to protect battery - can be disabled.
-Comes complete with full wiring loom, connectors, fuse and illustrated instruction manual.

Pump Protect - Incorporating features such as dead end detection, pressure switch shutdown, over-current detection and short-circuit detection, the V16 protects the whole system and helps save power and water.
PumpSmooth® - The advanced pump drive system runs the pump much more smoothly and quietly, and extends its life. With the V16 pumps can be driven slower, faster and harder than ever before.
PumpPrecision - Thanks to the new pump control technology*, the pump is monitored with far greater precision, saving water and energy, and offering faster and more accurate dead end detection.
PolarityProtect® -This feature means that the V16 will not be damaged if it is wired incorrectly; it simply will not work. Once it has been wired correctly, the unit will recover and work normally. (Applies to V16 only.) 

Please note: Graphic Label Overlay design may vary depending on stock