GrippaHOSE HydroHeat™ 100m Reinforced Hose 6mm ID

The GrippaTank HydroHeat™ Reinforced Hose is a premium-grade 6mm internal diameter reel hose designed for use with heated pure water systems. Featuring a combination of rubber and PVC materials, HydroHeat provides excellent flexibility, superb durability, and strong temperature-holding properties — even in sub-zero conditions.

HydroHeat hoses are designed specifically for use with GrippaTank's diesel-fired water heating systems. Unlike standard hoses, the rubber/PVC blend maintains high flexibility without collapsing or kinking when hot, offering a professional-grade solution for year-round operation.

Important Note:

GrippaTank does not offer HydroHeat hoses in 8mm ID.

8mm hoses are not recommended for diesel hot water systems because:

• The increased bore size would reduce heating efficiency and lower water temperatures.

• The heavier weight of 8mm hose increases operator fatigue.

Stick with the tested and proven 6mm specification for maximum performance and ease of use.

???? Technical Specifications:

• Internal Diameter: 6mm

• External Diameter: Approx. 10mm

• Hose Length: 100 metres

• Material: Specialised rubber/PVC hybrid construction

• Temperature Range: -10°C to +60°C continuous operation

• Maximum Working Pressure: Approx. 10 bar

• Colour: Red

• Weight: Approx. 11–13 kg per coil

• Recommended Use: Heated pure water systems, van-mounted WFP setups, trailer systems

• Operating Environment: Suitable for use in freezing temperatures

???? Flow Rate Test Results:

(Tested on a GrippaMAX 400 system, using 100psi AquaTec pump and Liquid Logic controller)

Flow rates are provided as a guide only and will vary depending on temperature, hose elevation, gradients, and system setup.